Design-In-Expertise And Service
Search for ...
Search:
Manufacturer Category Article Free text

Holtek CAN Bridge IC Family HT42B

Holtek CAN Bridge IC HT42Bxx6-1

Holtek CAN Bridge IC Family: The new series of CAN Bridge ICs HT42B216-1/316-1/416-1/536-1 extends the interface bridge product family in the CAN bus application area.

With the new CAN Bridge ICs, Holtek now offers an easy way to add a CAN interface to existing applications. For this purpose, a BOSCH CAN macro has been integrated which supports CAN 2.0 A/B according to ISO11898-1 protocol. Apart from a 16 MHz crystal and a 510 kOhm resistor to terminate the CAN bus clock, no other external components are required.

Holtek CAN Bridge IC Family HT42B – An overview

Each part of the HT42B CAN Bridge IC family supports a different host interface that is converted to CAN bus. All ICs are available in a 16-pin NSOP package and support an operating temperature range of -40 °C to +105 °C. The operating voltage is in the range of 3.0 V (or 3.3 V) to 5.5 V.

HT42B536-1 – USB to CAN Bridge

  • internal 12 MHz oscillator for USB
  • USB
    • USB 2.0 Full Speed compatible
    • CDC Class
    • 4 Endpoints (Control/Interrupt/Bulk Out/Bulk In)
  • CAN
    • according ISO11898-1 for CAN 2.0 A/B
    • datarate up to 1 Mbit/s
    • Payloads: up to 8 bytes per frame
    • Normal, Loopback & Listen mode

HT42B316-1 – SPI to CAN Bridge

  • internal 8 MHz oscillator
  • SPI
    • Slave Mode
    • SPI Mode 3
    • SPI clock up to 12 MHz
  • CAN
    • according ISO11898-1 for CAN 2.0 A/B
    • datarates from 5 kbps up to 1 Mbps
    • Payload: up to 8 bytes per frame

HT42B216-1 – I²C to CAN Bridge

  • internal 8 MHz oscillator
  • I²C
    • Slave Mode
    • Adresse via PINs IA0/IA1 configurable
    • I²C clock up to 400 kHz
    • 28-Byte FIFO RX & 28-Byte FIFO TX Buffer
  • CAN
    • according ISO11898-1 for CAN 2.0 A/B
    • data rates between 5 kbps and 1 Mbps
    • Payload: up to 8 bytes per frame

HT42B416-1 – UART to CAN Bridge

  • internal 8 MHz oscillator
  • UART
    • Baud Rate up to 115200 bps
    • Format: 8 Data Bits, 1 Stop Bit, no Parity
    • 28-Byte FIFO RX & 28-Byte FIFO TX Buffer
  • CAN
    • according ISO11898-1 for CAN 2.0 A/B
    • data rates from 5 kbps up to 1 Mbps
    • Payload: up to 8 bytes per frame

Datasheet HT42B536-1

Datasheet HT42B216-1

Datasheet HT42B316-1

Datasheet HT42B416-1

For the USB to CAN Bridge HT42B536-1 Holtek offers both a DLL and a USBCANBusTool for Windows to simplify host software development for customers. In addition, the IC is supported by standard Windows® drivers for Virtual COM Port (VCP): Windows XP (SP2), Vista, Windows 7, Windows 8 (only an INF file is required), driver-free for Windows 10 and higher.

If you are interested in the Holtek Bridge IC, are looking for suitable CAN transceivers (3PEAK, Novosense) or want to realise other interfaces in your next project, please contact us directly or send us your enquiry here – we will get back to you as soon as possible

    Please contact me by


    I'm intressted in:

    QuotationVisitDatasheetSamplesOthers